energy saving rice husk biomass Wheat straw Briquette Machine
Material :
rice husk,sunflower seed husk,peanut shell and other fruit shell;branch,trunk,bark and other wood waste;a variety of corp straws,rubber,cement,ash and other chemical materials.
Introduction:
Biomass pellet machine is also called wood pellet machine, sawdust pellet machine. Obviously, the most basic material of biomass pellet machine is sawdust sawdust, so we can extend to branches, bark, miscellaneous wood, logs, scrap wood, furniture. The factory's scraps, shavings, wooden pallets, stencils, etc. Some wood and wood products, such as corn stalks, rice straw, peanut shells, rice husks, cotton stalks and some other grain stalks, can also be used as raw materials for biomass pellets.
What is the material to use for the biomass pellet machine?
1
Biomass fuel is made from solid waste such as corn stalks, wheat straw, straw, peanut hulls, corn cobs, cotton stalks, soybean stalks, chaff, weeds, branches, leaves, sawdust, and bark. Pressurized, densified, and formed into a small rod-shaped solid particulate fuel. The pellet fuel is produced by pressing a raw material such as wood chips and straws by a press roll and a ring die under normal temperature conditions. The density of raw materials is generally about 110-130kg/m3, and the density of particles after molding is more than 1100kg/m3. It is very convenient to transport and store, and its combustion performance is greatly improved.
What is the process?
2
The process flow is raw material collection → raw material pulverization → raw material drying → granulation molding → bagging sales. According to the harvest period of the crops, the raw materials should be stored in large quantities in time, followed by pulverization and molding. When molding, be careful not to pack the bag immediately. The principle of heat rise and contraction is to be cooled for 40 minutes, and then bagged for transportation.
What is the characteristic?
3
Characteristics of wood pellet fuel The pellet fuel after molding is large in size, small in volume, resistant to burning, and easy to store and transport. The volume after molding is 1/30~40 of the volume of the raw material, the specific gravity is 10~15 times of the raw material (density: 0.8-1.4), the calorific value can reach 3400~6000 kcal, and it is the solid fuel of high volatile phenol.
What is the application?
4
The use of biomass pellet machine The pellet fuel after straw molding is a new type of bioenergy. It can replace wood, raw coal, fuel oil, liquefied gas, etc. It is widely used in heating, life stoves, hot water boilers, industrial boilers, raw Material power plant, etc.
Technical information:
| Model |
Capacity(t\h) |
Power(kw) |
Pellet size(mm) |
Weight(t) |
Size(m) |
| XGJ470 |
0.6-0.8 |
75 |
4-20 |
3.8 |
2.1*1.02*1.985 |
| XGJ560 |
1-1.5 |
90 |
4-20 |
6.1 |
2.3*1.18*2.2 |
| XGJ580 |
2-2.5 |
110 |
4-20 |
6.5 |
2.35*1.23*2.3 |
| XGJ650 |
2.8 |
132 |
4-20 |
7.3 |
2.9*1.3*2.4 |
| XGJ750 |
3.2 |
160 |
4-20 |
8.5 |
2.9*1.45*2.5 |
| XGJ850 |
4 |
220 |
4-20 |
11 |
3.3*1.6*2.67 |
){kind=link}